Thyristor Regulators
อุปกรณ์ที่ใช้ควบคุม Voltage ที่จ่ายให้กับฮีตเตอร์ซึ่งเป็นตัวกำเนิดความร้อน โดยไม่มีการตัดกระแสไฟฟ้าที่จ่ายให้กับฮีตเตอร์
ฮีตเตอร์จะร้อนอยู่ตลอดเวลา แต่จะร้อนมากหรือน้อยขึ้นอยู่กับ ตัว Temperature Transmitter ที่รับค่าอุณหภูมิมาจากหัววัดอีกที Out put ของ Temperature Transmitter จะเป็นค่าไฟฟ้ากระแสตรง ตามมาตรฐานของการส่งค่าโพรเซส (Process value)
Skillfull Installation Team
มีทีมงานติดตั้งมืออาชีพ
ทีมงานติดตั้งมืออาชีพที่มากด้วยประสบการณ์ สามารถติดตั้งงานได้อย่างเรียบร้อย เป็นระบบ เพื่อป้องกันความล่าช้า หรือความผิดพลาดที่เกิดขึ้นจากการติดตั้ง
After-sale service
มีบริการหลังการขาย
ไม่ว่าจะเป็นเรื่องของการ maintenance หรือการแก้ไขปัญหาหน้างาน เรามีทีมงานที่ได้รับการฝึกฝนให้ทำงานอย่างเป็นระบบ วิเคราะห์และแก้ไขปัญหาได้อย่างตรงจุด บริการได้รวดเร็วและมีมาตรฐาน
Calibration Service
มีบริการสอบเทียบ
มีบริการสอบเทียบเครื่องมือ วัดจากโรงงาน
ผู้ผลิต และห้องปฏิบัติการตามมาตรฐาน
PRODUCT / MODEL
Single-Phase Thyristor Regulators
Model : JU Series
Features
Small and lightweight thyristor regulators for single-phase loads are characterized with high panel installation density. Two control systems, a phase-angle firing system and a zero-cross firing system, are built in and can be changed by remote contacts signal
Three-Phase Thyristor Regulators
Model : JW Series
Features
JW Series is compact lightweight three-phase control thyristor regulators with high-density instrumentation.
• Control methods are divided into two ways, the phase control & zero-cross control.
• In the phase control systems, a type with the voltage,current & power feedback control types and
without feedbacks type are available according to the heater used characteristics .
• Advanced three-phase control is based on 6-arm control & fine control setting from communication unit.
• Remote control & data monitoring is available by connecting to a host unit.
Single-Phase Thyristor Regulators
Model : JB Series
Features
Compact and relatively low-priced single-phase thyristor regulator (no feedback).
Rated voltage 20A to 100A, six types are available for your convenience and used readily.
• Compact all-in-one type, so it doesn’t take much space to install and wiring is also simple.
• Phase-angle firing control and zero-cross firing control can be switched.
• Controllability is improved by soft start, soft up-down, soft start at recovery from momentary interruption.
• Frequency auto distinguish function, gradient setting function, and lower-limit setting function are equipped.
Control Motor
Model : CMC Series
Features
This is a control motor designed by combining a single-phase condenser starting induction motor with a reduction gear mechanism, cam, microswitches, control level, etc. It is used in combination with a controller in order to control valves, dampers, burners, etc.