Fluoride Ion Analyzer

เครื่องวัดค่า Fluoride (ฟลูออไรด์) ในน้ำดีและน้ำเสีย แบบติดตั้ง, online

DKK.png
เครื่องวัดปริมาณฟลูออไรด์ (Fluoride) แบบติดตั้งพร้อมตัวส่งสัญญาณ จาก TOA-DKK แบรนด์ชั้นนำจากประเทศญี่ปุ่น สามารถวัดค่าฟลูออไรด์ (Fluoride) ในน้ำดีและน้ำเสีย ได้อย่างแม่นยำและเชื่อถือได้  เหมาะกับโรงงานอุตสาหกรรมทุกประเภท ทีมงานมีประสบการณ์สูง สามารถสอบเทียบเพื่อใช้งาน ISO มีทีมงาน Service รับ Calibration

Sample Configuration ตัวอย่างระบบควบคุมคุณภาพน้ำแบบติดตั้ง/ออนไลน์

Loop of process analyzer-02.jpg
Fluoride Ion monitor (Panel Mounting)
GX-2009 {1}.jpg

Model : FBM-100A

Features

- Fast response time: for a sample containing 2mg/L fluoride ions, an alarm will be generated within 30 seconds at 90% response.
- Low, middle and high ranges available as standard (0~20, 0~200. 0~2000 mg/L).
- 4 alarm outputs available. These can be configured based on user’s requirements such as concentration alarms, instrument error, under cleaning, etc.. Concentration alarms are adjustable for delay time and band width.
- Control outputs (100 VAC) are available for external electrode cleaners such as water-jet cleaner.
- Output for sample temperature measurement is available (Model FBM-160).
- RS-232C output signal for measured concentration, sample temperature, concentration alarms etc. is available

CP SERIES INDUSTRIAL USE pH•ORP•ION ELECTRODES
GX-2009 {1}.jpg

Model : ELCP

Features

- CP series industrial use pH/ORP/ion electrodes are KCl non-supply type electrodes.
- These electrodes are the result of continuous research and development and offer high performance, ease of installation and low maintenance requirements.
- The electrodes are compatible with DKKTOA's transmitters that have a temperature compensation function based on a 10kΩ (at 250C) sensor.
- These electrodes can be incorporated into immersion type holders, flow through type holders or dip-in type guide pipes. The process connection is a universal pipe thread (Rc3/4), allowing compatible holders and guide pipes to be easily obtained by users.

Fluoride Ion monitor (Field Mounting)
GX-2009 {1}.jpg

Model : FBM-160

Features

- Fast response time: for a sample containing 2mg/L fluoride ions, an alarm will be generated within 30 seconds at 90% response.
- Low, middle and high ranges available as standard (0~20, 0~200. 0~2000 mg/L).
- 4 alarm outputs available. These can be configured based on user’s requirements such as concentration alarms, instrument error, under cleaning, etc.. Concentration alarms are adjustable for delay time and band width.
- Control outputs (100 VAC) are available for external electrode cleaners such as water-jet cleaner.
- Output for sample temperature measurement is available (Model FBM-160).
- RS-232C output signal for measured concentration, sample temperature, concentration alarms etc. is available