sample of the basic process of water tre
Analyzer for Water
& Waste Water Treatment

การบำบัดน้ำเสียเป็นกระบวนการที่จะกำจัดสิ่งปนเปื้อนและกากตะกอนส่วนใหญ่ออกจากน้ำเสีย   น้ำทิ้งที่เป็นของเหลวก่อนปล่อยสู่สภาพแวดล้อมตามธรรมชาติ จะต้องมีการวัดค่าพารามิเตอร์    มาตฐานต่าง ๆ เช่น pH, Conductivity, Temperature,  COD,  BOD,  SS,  MLSS เป็นต้น

ทั้งนี้ กระบวนการวัดวิเคราะห์แต่ละพารามิเตอร์ขึ้นอยู่กับระบบบำบัดน้ำเสียของโรงงาน

Sample Configuration ตัวอย่างระบบบำบัดน้ำดี / น้ำเสีย



Suspended Solids Concentration Analyzer

Model : SSD-1610 (for low concentration)
Model : SSD-1620 (for medium concentration)

GX-2009 {1}.jpg

• Immersion, drop-in and pipe insertion type detectors with motor-driven piston type small sensor
• High reliability with long life optics design
• Meas. range
SSD-1610 ; 0~1000mg/L
SSD-1620 ; 0~20000mg/L

Reagentless Residual Chlorine Analyzer

Model : CLF-1620

GX-2009 {1}.jpg

• Measures total residual chlorine of drainage water without reagent
• Continuous measurement by Polarographic method
• Meas. range
0~0.5/1.0, 0~1/2, 0~2/3mg/L (ppm)

Specification Sheet
Residual Chlorine Analyzer

Model : CLF-1600

GX-2009 {1}.jpg

CLF-1600 accurately measures free chlorine concentration in chlorination process in city water
production facility and it also measures chlorine concentration for each kind of chlorine.
• Employs a polarographic method during the chlorination of purified water to continuously measure the residual chlorine concentration (TOTAL or FREE).

Turbidity Analyzer

Model : TUF-1600

GX-2009 {1}.jpg

TUF-1600 continuously measures the turbidity of water for public water supply and sewerage
system, river water, and water used in industrial processes. A light flux is applied to an
overflowing water surface in a measuring cell and the resultant light scattering is measured:
surface scattering light measuring method is adopted to this turbidity analyzer.

Suspended Solids Concentration Analyzer

Model : SSF-1600

GX-2009 {1}.jpg

• Extensive measurement ranges
• Infrared detector
• Practical calculation features
• Detector options ; Throw-in type and drop-in type

Reagentless Free Chlorine Analyzer

Model : CLF-1610

GX-2009 {1}.jpg

CLF-1610 measures free chlorine concentration in water after chlorine treatment.
• Employs a reagentless polarographic method during chlorination to continuously measure the
free chlorine concentration (FREE) in city water.
• Equipped with the digital output RS-485 for Modbus communication, making it possible to
remotely conduct maintenance.

Alkalinity Analyzer

Model : ALF-1600

GX-2009 {1}.jpg

ALF-100 measures alkalinity (total alkalinity at CaCO3 conversion) in raw water for service water
and purified water.
• Employs a coulometric titration method to measure continuously the total alkalinity in water put
through the purification process.
• Equipped with a reagent tank (30 L) and consumes about 1/4 of the reagent amount consumed
by conventional models.